PRODUCTS

Not just a simple layer of thin film.
It contains silicone resin, silicone fluorine compounds, solvents, such as titanium oxide and ethanol.
Not cause environmental pollution materials with the acid in the air and water to produce hydrolytic decomposition of a chemical reaction.
Abrasives: this product is suitable for all kinds of the paint repair renovation, its composition of grinding agent, filling agent, reducing agent can quickly repair paint scratches. Can easily remove the oxide film on the surface, it is difficult to remove stubborn dirt, paint spot, burr and aging lacquer layer, and colour and lustre lacquer layer again.
Reducing agent: this product contains reductant ultra-fine abrasives, colour, can effectively remove most of the rotary marks or various minor scratches, immediately to the paint to paint color, high gloss of "mirror" effect, leaving a layer of shine bright surface at the same time, choose the highest quality components materials refined but become.
Carbon crystal coating agent: this product has the high and low temperature resistance, oxidation resistance, breathe freely, waterproof effect, good film-forming, strong adhesion, the paint can form uniform and transparent vitreous hard solid inorganic membrane, long lasting protection.
Care agent: this product can form have burnish, non-stick water excellent transparent membrane protective film layer, can prevent dirt, and also has the protective effect of acid rain; The most suitable for coating the follow-up maintenance process and maintenance, increase brightness film smoothness.

Specification：6sets/carton
COde：B-1990
shelf life：3 years
Executive Standard：as per product

1. The coating operation should be conducted by the guidance of professionals, or directly to the auto 4 s shops, beauty shop operation construction professional and technical personnel.
2. The coating must choose good place in less indoor dust and light construction.
3. Just stop or after blasting bask in engine, and so on and so forth make car paint surface temperature is above 40 degrees Celsius, must wait for paint is cooled to a coating construction. Special note: after construction coating needs to achieve optimum hardness after a week, so a week after the construction, it should be noted:
(1). Within 48 hours after the construction, avoid water adhesion on the paint, if not careful to adhere, to dry the water as soon as possible.
(2). When the car is driven at night, when faced with insects and other debris adhesion, should clean up in time.
(3). If conditions allow can be parked in the underground garage, etc to cover protection.
(4). A week after the coating should be avoid wash the car.